info@eliteengineeringindustries.com
08242407870 ,+917259135751
Pressure Vessels are used extensively in Process Industries like Chemical, Pharmaceuticals, Paint & Coatings, Resin Plants, Biotech industries etc. Our Engineering and design department first study the customers process requirements and design the equipment as per relevant codes.
| 1 | Design Code: | ASME SEC. VIII Div 1 and 2, IS-2825, API-650, PD 5500 Codes & Standard |
|---|---|---|
| 2 | Fluid: | Oxygen, Propane, Ammonia, Nitrogen, Hydrogen |
| 3 | Design Software: | PV ELITE |
| 4 | Shell Diameter: | Upto 4000 mm |
| 5 | Shell Length: | Upto 20000 mm |
| 6 | Shell Plate Thickness: | Upto 25 mm |
| 7 | MOC: | CS (516 GR 60/70, HIC, NACE) SS (410/304/316/321) CS (516 GR 60/70, HIC, NACE) + SS (410/304/316/321) cladding CS with Thermal Spray Aluminizing |
| 8 | Vessel Weight: | Upto 30 tons |
| 9 | Orientation: | Vertical, Horizontal |
| 10 | External: | Limpet Coil/ Jacket |
| 11 | Pressure Rating: | FV to 40 kg/cm2 |
| 12 | Statutory Approvals: | IBR |
| 13 | Inspection Agencies: | DNV, BVIS, TUV |
It stores compressed air, condense and trapped moisture in the compressed air and to let the impurities settle down before air passes into the piping. It also equalises pressure variations in the pipe and prevents short cycle loading and unloading of the compressor.
| 1 | Design Code: | ASME SEC. VIII Div 1 and 2, IS-2825, API-650, PD 5500 Codes & Standard |
|---|---|---|
| 2 | Media: | Air |
| 3 | Design Software: | PV ELITE |
| 4 | Shell Diameter: | Upto 3500 mm |
| 5 | Shell Length: | Upto 12000 mm |
| 6 | Shell Plate Thickness: | Upto 25 mm |
| 7 | MOC: | CS (516 GR 60/70, HIC, NACE) SS (410/304/316/321) |
| 8 | Vessel Weight: | Upto 25 tons |
| 9 | Orientation: | Vertical, Horizontal |
| 10 | Pressure Rating: | FV to 40 kg/cm2 |
| 11 | Statutory Approvals: | IBR |
| 12 | Inspection Agencies: | DNV, BVIS, TUV |
Heat Exchangers are designed and manufactured to facilitate indirect heat transfer between the two fluids. Shell and tube heat exchanger are probably the most widespread and commonly used heat exchanger configuration in the process industries.
We manufacture wide range of shell and tube type heat exchangers as per process requirements. We stand for quality and reliability of heat exchangers exposed to tough service conditions.
| 1 | Shell & Tube Application: | Heaters, Coolers, Steam Separator, Pre/Post heating, Feed water, Condensers, Evaporator, Sample Coolers |
|---|---|---|
| 2 | Design Code: | ASME SEC. VIII Div 1 and 2, TEMA, HEI, API-660, IS-2825, IS-4503 |
| 3 | Design Software: | PV ELITE |
| 4 | Heat Transfer Area: | Upto 1000 sq m |
| 5 | Shell Diameter: | Upto 3500 mm diameter |
| 6 | Tube Length: | Upto 6000 mm long |
| 7 | Tubesheet Thickness: | Upto 150 mm |
| 8 | Hole Diameter: | Upto 50 mm |
| 9 | Tubes: | Straight, U-Tube Finned |
| 10 | MOC: | Carbon Steel, Duplex, Stainless Steel |
A distillation column is an essential static equipment in process industries used to separate the mixture into it’s component or fractions, based on the differences in volatilities.
We offer a wide range of distillation columns those are design as per ASME code & highly effective in distillation process. In order to maintain quality standard of Distillation columns, our experts monitor the entire production process. All material are procured from reputed suppliers with test certificates to ensure the quality and reliability of distillation column to end user.
| 1 | Design Code: | ASME SEC. VIII Div 1 and 2, IS-2825, API-650, PD 5500 Codes & Standard |
|---|---|---|
| 2 | Media: | As per process requirement |
| 3 | Design Software: | PV ELITE |
| 4 | Shell Diameter: | Upto 5000 mm |
| 5 | Shell Length: | Upto 20000 mm |
| 6 | Shell Plate Thickness: | Upto 25 mm |
| 7 | MOC: | CS (516 GR 60/70, HIC, NACE) SS (410/304/316/321) CS (516 GR 60/70, HIC, NACE) + SS (410/304/316/321) cladding CS with Thermal Spray Aluminizing |
| 8 | Vessel Weight: | Upto 30 tons |
| 9 | Orientation: | Vertical, Horizontal |
| 10 | Pressure Rating: | FV to 40 kg/cm2 |
| 11 | Statutory Approvals: | IBR |
| 12 | Inspection Agencies: | DNV, BVIS, TUV |
Our extensive experience and technical expertise enable us to manufacture a wide range of boiler components like shaped tubes, Water wall tube panels, Economisers, Superheaters, Coils, Soot blowers , Steam piping and Pipe fittings as per operational requirements. With the experience of close to 3 decades, we have been able to meet the demands from industries like refinery, fertilizers, pharma and captive power plants.
We manufacture a wide range of storage tanks that find wide application in process industries. These storage tanks are used in many configurations depending upon their functional requirements , operating temperature and storage medium.
We manufacture customized storage tanks as per the technical specifications and requirements of the client. These tanks are corrosion resistant and easily withstand various temperature fluctuations and variations.
| 1 | Design Code: | API-650 |
|---|---|---|
| 2 | Media: | Water, Chemicals |
| 3 | Shell Diameter: | Upto 5000 mm |
| 4 | Shell Length: | Upto 12000 mm |
| 5 | Shell Plate Thickness: | Upto 25 mm |
| 6 | MOC: | CS (516 GR 60/70, HIC, NACE) SS (410/304/316/321) |
| 7 | Vessel Weight: | Upto 30 tons |
| 8 | Orientation: | Vertical, Horizontal |
| 9 | Pressure Rating: | ATM |
| 10 | Statutory Approvals: | IBR |
| 11 | Inspection Agencies: | DNV, BVIS, TUV |